UCLA Builds PhoneBot, a $400 Open-Source Humanoid Robot Powered by Android
UCLA's open-source PhoneBot turns a drawer-bound Android phone into the brain of a 48 cm bipedal humanoid for about $400.
Takeaways
- UCLA's PhoneBot is an open-source 48 cm bipedal humanoid using an Android phone as its brain.
- Bill of materials is roughly $400 excluding the phone, aimed at classrooms and labs.
- 13 DYNAMIXEL XL430 servos: six per leg plus one torso rotation joint, no arms yet.
- Phone provides IMU, camera, Wi-Fi, and compute; runs control via TensorFlow Lite.
- Tested on Honor 9, Moto G 2024/2025, and Samsung Galaxy A16 5G handsets.
- Demonstrates walking, camera-based human tracking, and a face-down stand-up recovery policy.
Researchers at UCLA’s Robotics and Mechanisms Laboratory built PhoneBot, a small humanoid whose perception and computing run on an Android phone mounted in its torso. The robot stands 48 cm tall, weighs 1.8 kg, and uses 13 servos. Its parts cost roughly $400 before adding the handset, according to a cost report.
By combining the camera, motion sensors, processor, and wireless connection in one device, the design reduces the number of separate electronics that developers must buy and integrate. UCLA released the mechanical designs, firmware, training code, and Android application as open source.
| Specification | PhoneBot |
|---|---|
| Height | 48 cm |
| Weight | 1.8 kg |
| Actuators | 13 DYNAMIXEL XL430-W250-T servos |
| Compute and perception | Android smartphone |
| Parts cost | About $400, excluding the phone |
| License model | Open-source hardware and software |
One phone absorbs the electronics stack
Many research bipeds assemble a camera, inertial measurement unit, compute module, wireless radio, and control hardware from separate components. PhoneBot uses the handset’s built-in camera, inertial sensors, processor, and connectivity. The Android application reads those sensors, runs the control models, and sends commands to the servo hardware over USB.